how to draw a fox how to draw a cute fox

Download Commodity

Download Article

Foxes are distinctive, easily-recognizable animals that brand a good subject for cartoon. Whether y'all'd like to describe a fox in a drawing style or a more realistic way, start by sketching a pencil outline made of various circles and ovals. Then, fill in the finer details and raise your initial outline with a pen or mark. Finish off your fob drawing by adding a splash of color, and then try your hand at some more cute animals!

1. 1

   Sketch in the head as a big egg-like shape centered on the folio. Tilt the egg on its side—for case, so the narrower role of the egg's oval is pointed to the left. Since this is a drawing play a trick on, feel free to make the head large!^[1]

   • Sketch lightly with a pencil and so that you lot can erase any mistakes or extra lines at the end.

2. ii

   Draw the ears with 2 smaller egg-like shapes on peak of the head. Imagine the head as a clock face and place the ears at about the 12 and 3 o'clock positions. Make the far-side ear "egg" betoken straight upwardly, and the near-side ear lean towards the fox'south (shortly to be drawn) tail at about a 30-caste bending.^[2]

   Ad

3. 3

   Make an oval for the trunk that's about the same size as the head. Center this oval beneath the almost-side ear and overlap it slightly over the lower section of the head.^[3]

   • Since this is a drawing play tricks, you can adjust the proportions to your liking. If you lot want the caput to be larger than the body, get for information technology!

4. iv

   Sketch in 3 pairs of ovals for 2 forepart legs and a rear leg. For the legs, space out three upright ovals fairly evenly across the lesser of the body oval. Roughly the top half of each leg oval should overlap the body oval. Add 3 smaller horizontal ovals at the bottoms of the legs to correspond the feet. These should overlap the lower legs by about half.^[4]

   • At that place are merely three legs visible due to the viewing bending for this cartoon fox In other words, the far-side rear leg is hidden behind the near-side rear leg.

5. 5

   Add a cloud-, thought chimera-, or bean-shaped tail. It'due south a bit difficult to describe the shape the tail should take—possibly it's a question mark-shaped balloon filled with too much air! Anyway, extend this curvy tail off the rear-end side of the body oval, overlapping it only slightly.^[5]

   • Make the tail nigh the same size as the head and at most the aforementioned level.

6. 6

   Define the features of the fox within your rough outline. For instance, requite the tail more of an upward ringlet within the outline you simply made. Too, define the insides of the ears and the toes on the paws. Add a curved "paring" to the top front end of the caput oval to help ascertain the cage, so sketch in a smiling mouth and a rounded nose and eyes.^[6]

   • Since this is a drawing fox, there'southward lots of room for individuality here. You lot tin brand your fob look a bit more than human being, a little more realistic, or any other way you similar!

7. vii

   Darken the finishing lines and erase your original sketching lines. Go over the features you simply created with a pen or marker to make them permanent. Later that, utilize an eraser to get rid of any excess pencil lines from your original sketching.^[7]

8. 8

   Color your cartoon trick to terminate information technology off. "Burnt orange" is a skillful color choice for a fox, but you might want to give a cartoon fox more than of a blood-red color. Add in some off-white areas on the breast, muzzle, lower legs, paws, and tail.^[8]

   Advertisement

1. 1

   Sketch a circumvolve in the heart of the page for the fob'southward head. Rather than trying to describe a perfect circle, make it a bit flattened on the lower correct side—if that's the side where yous desire the fox'southward neck and trunk to attach to its caput. Sketch the circle lightly with a pencil.^[9]

   • Do all of the preliminary sketching in pencil and use a calorie-free touch. This fashion, yous can easily erase any unnecessary pencil lines equally you lot mankind out the details of the drawing.

2. ii

   Add iii egg-shaped ovals to the caput for the ears and cage. If yous imagine the caput as a clock face, place the ears at roughly ten and one o'clock. Make the muzzle a chip larger than the ears and identify it at most seven o'clock.^[10]

   • The narrower "tops" of the egg shapes should protrude beyond the circular outline of the head. About 2-thirds of the left ear, one-3rd of the correct ear, and half of the muzzle should extend across the head.

3. 3

   Overlap the bottom right of the caput with a slightly larger circle for the neck. Make this circle about one-tertiary larger than the head, and give it a bit of an oval shape. Well-nigh one-3rd of it should overlap the lower right side of the circle for the caput.^[xi]

4. 4

   Sketch out a much larger oval to stand for the fox'south body. This oval should extend to the right of and slightly below the circle for the cervix. It should as well overlap the neck circle and just touch the circle that represents the head.^[12]

   • The body oval should be about i.5 times taller than the neck circle and about 3 times wider.

5. 5

   Connect a set up of elongated ovals to represent the front end legs and feet. Elongate the shoulder oval vertically, brand information technology overlap the neck oval slightly and run to simply below the trunk oval, and tilt information technology about 30 degrees towards the front end of the fox. Make the leg oval about twice as long and half as wide, and extend information technology straight down from the shoulder. Create the foot oval at a correct angle to the leg.^[xiii]

   • After finishing the outline for the nigh-side front leg, sketch in the front portion of the leg and human foot ovals of the far-side front leg. Make them extend just a fleck in forepart of the near-side leg.

6. 6

   Follow a similar process with 4 ovals for the rear legs and feet. Make the rear shoulder about ane.five times as long and twice equally wide as the front end shoulder. Instead of a single leg oval, draw 2 ovals that see at xxx-degree angles to represent the knee articulation. Make the back foot oval the same size every bit the front end pes.^[14]

   • A play a joke on's dorsum knees curve towards its tail, not towards its head.
   • As with the far-side front leg, create overlapping elements of the far-side rear leg in similar proportion to the near-side rear leg.

7. 7

   Draw the tail out of a long, nearly assistant-shaped oval. Connect it to the back of the body oval and run it down to the ground level where the fox'south feet are. Make the oval wide enough to partially overlap the almost-side rear shoulder and articulatio genus.^[xv]

   • Sketch the tail at roughly the same angle every bit the upper rear leg.
   • Make the tail almost the same length as the body oval, but more than narrow by well-nigh half.

8. 8

   Refine the fox'southward body shape and add facial features. After you've finished outlining the fox using various oval shapes, add definition to its various features. Make the trunk leaner in the abdomen, and contour the legs to requite a more than muscular look. Make the tail a bit wavy, and use small curved lines to add indications of fur on the tail and at the front of the chest.^[16]

   • Foxes accept narrow, somewhat football-shaped eyes, lean muzzles with slightly-rounded noses, and athwart simply slightly-rounded ears. Refining the facial features may exist the toughest part, then refer to images of foxes for guidance.

9. ix

   Darken your refinements with pen and erase the pencil outlines. In other words, trace over the more than divers torso, legs, tail, head, and face that you merely created. Then, erase the original ovals you lot used to shape the outline of the play a trick on.^[17]

   • If yous sketched lightly in pencil, the lines should vanish without any trouble.

10. 10

    Color the drawing, if desired, to finish it off. Make the lower halves of the legs, the lower 3rd of the tail, the front of the chest, and the bottom half of the muzzle an off-white colour. Fox fur can carry shades of red, orangish, and brown, but a "burnt orange" shade may give you a fairly typical fox color.^[xviii]

    Advertisement

1. i

   Start with a circle and a curved line extending from its lesser left. It should await like a balloon on a cord that's defenseless in a low-cal breeze, or perchance a lollipop with an arched stick. The circumvolve represents the play tricks's head, and the bend traces the path of its spine.^[19]

   • Make the curved line about iii times equally long every bit the diameter of the circumvolve.

2. ii

   Sketch in the pointed ears and rounded snout on the circular caput. Create a "T" shape that covers the bottom half of the circumvolve. Double the length of the T's vertical stem by extending it beneath the circle, and so sketch in a "U" shape for the muzzle that surrounds the lower one-half of the T's stem.^[20]

   • Draw 2 tall, pointed arcs—roughly the shape of wishbones—for the ears. Imagine the circle equally a clock face and place them at virtually the x and 2 o'clock positions.

3. 3

   Add some other circle and curved line to outline the trick's body and rear thigh. In basic terms, draw a contrary epitome of the circle and bend that you started with so that the two curved lines connect the two circles. The lines should curve a chip similar a pair of parentheses— ( ) —while the lower circumvolve should have a bit more of an oval shape.^[21]

   • Don't middle the rear thigh directly beneath the caput. Rather, off-set it then it's roughly centered under the left ear.

4. 4

   Use more ovals and lines to outline the tail and legs. For the tail, make an irregular oval that narrows towards the fox's front side and appears a bit squashed flat on elevation. Make it overlap and extend beyond the bottom half of the oval representing the flim-flam's thigh.^[22]

   • For the near-side forepart shoulder, draw a circumvolve that'southward slightly smaller than the head and place it correct between the 2 curves that outline the trunk. Extend a line down from the circle at nearly a thirty caste forward angle, so draw a parallel line that extends from the curved line that represents the belly.
   • The two parallel lines establish the positioning of the fob'south front legs.

5. 5

   Thicken the legs and add together triangles for the front end paws. Sketch in a pair of parallel lines on either side of each of the lines y'all just drew for the legs. Each leg should exist about 2-thirds as thick as the diameter of the upper shoulder circle. Sketch in a triangle at the bottom of each leg to outline the front feet.^[23]

6. 6

   Sketch in the confront and create a jagged outline to correspond fur. Become around the shine outline of your fob and add in jagged lines where fur would likely exist tufted—for instance, along the chest and spine, within the ears, around the tail, on top of the thigh, on the underside of the shoulder, and on the paws. Then, employ the T shape on the face to guide your placement of the eyes, nose, and mouth.^[24]

   • Draw in two football game-shaped eyes that are attached to the underside of the horizontal line of the T shape. Centre the circular olfactory organ within the U-shaped muzzle. Make the oral cavity a elementary horizontal line across the lesser quarter of the cage.

7. vii

   Darken your detailed lines with pen and erase your penciled-in sketch lines. Become back over the jagged lines you fabricated for the fur, and darken and add farther detail to the facial features, the paws, and whatever other areas that demand further refinement. Once you're done penning in the features, erase all unnecessary pencil lines.^[25]

8. 8

   Add some color to your fob cartoon if you lot wish. Foxes are oftentimes a "burnt orange" color, but they can also be more cherry-red, orange, or dark-brown. Choose the fur color that you lot adopt.^[26]

   • Foxes have off-white areas of fur as well, such equally the insides of the ears, the bottom half of the cage, the underside of the cervix and front of the chest, the rear third of the tail, and (sometimes) the paws and the bottom halves of the legs.

   Advertisement

Add New Question

• Question

  How can I memorize drawing foxes?

  

  Practise, practice, practice. The more than you draw these foxes, the better yous can call up how to draw them. Endeavor focusing on specific features of the fox that define it, like the eyes or the pose.

• Question

  How practise I improve my cartoon skills?

  

  Practice. Learn from other artists and claiming yourself to draw each day.

• Question

  What do I do if I only take a pen?

  

  Pens are one of the best art tools! Describe using light strokes at kickoff, and so use more pressure in one case you have an outline.

• Question

  Can I apply a Sharpie to describe a play a joke on?

  

  You can, merely if you practice guidelines (base shapes such as circles for the base of the caput that are erased in the terminate), exist sure to apply a pencil for initial sketching.

• Question

  How can I draw an anime trick?

  

  Y'all tin can utilize more detailed lines with more pointy lines for fur. It might also assistance to utilize more time-consuming designs.

• Question

  Are at that place whatsoever other ways to depict a play tricks other than the i in the commodity?

  

  Of grade! Every artist has a different method. Some people utilize circles and ovals, while others can employ rectangles, squares, or other shapes, such as triangles. This is why practice makes perfect; if you lot don't do, y'all don't figure out what method works best for yous. Yous may fifty-fifty come up with a brand new method.

• Question

  What should I do if I make a mistake on my drawing in Sharpie?

  

  You lot can try putting something like whiteout over it, but if that's not possible, then there isn't really annihilation yous can do.

• Question

  How do I do the fur?

  

  Angelart

  Community Answer

  Crate ragged lines beyond the outline of the fox to make fur.

• Question

  Does it make a difference if you use a mechanical pencil instead of a regular one?

  

  Generally, you lot get a softer looking line with a regular pencil considering the pb is thicker than that of a mechanical pencil. That's about it.

• Question

  How can I erase it if I only accept a pen?

  

  You can't erase it, so just sketch lightly or use an erasable pen.

Run across more answers

Ask a Question

200 characters left

Include your email address to get a bulletin when this question is answered.

Submit

Advertisement

VideoRead Video Transcript

Thanks for submitting a tip for review!

Things Yous'll Need

• Newspaper
• Pencil
• Eraser
• Pen or marker
• Colored pencils, crayons, markers, pastels, or paint.

About This Commodity

Article Summary Ten

If you want to draw a fox, start by sketching a circle that is squashed on one end for the caput. Next, draw three triangle-like ovals on top of the head, two for ears and one for the fox's cage. For the neck and body, draw a circle under the caput and a longer oval under the circumvolve. To depict the legs, sketch ovals on the bottom left for the front legs and lesser right for the hind legs. Then, draw a long oval at the correct-manus end for the tail. Finally, remove all unwanted lines, strengthen the contours with a pencil, and colour your drawing. To learn how to draw a drawing fox or a fox sitting down, read on!

Did this summary help you?

Thanks to all authors for creating a folio that has been read 554,545 times.

Did this article help y'all?

Source: https://www.wikihow.com/Draw-a-Fox

Posted by: adamsfirwass66.blogspot.com

Share this post